|
|
| Model # : | ACC-99 | |||||||||
ACC-99 stand alone keypad access controller is a PC software based RS485 networked access control system, it can have maximum 8 units in one network access control system(maximum 8 ACC-99 could be connected within a same RS485 network door access control system).
On one hand, ACC-99 stand alone keypad access controller could be used as a single access control without software management by all programming on the keypad. ACC-99 stand alone keypad access controller could have operation methods such as proximity card(125KHz card), password, proximity card plus password, which allows the users having the convenient options to enter into the secured area.
On the other hand, ACC-99 stand alone keypad access controller could be used as a maximum 8-door network door control system with software management, except those functions owned by standalone access control, software based could also authorize previliges and time zones from software and later on have the access history of all the events happpened in the door control period.
However, ACC-99 stand alone keypad access controller has alluminum alloy housing to make it more durable and vandal proof, with its attractive appearance, ACC-99 stand alone keypad access controller is a good option for small secured area application
Basic functions
Maximum control 8 doors
RS485 connection
Multi-language PC software
PC software based
Maximum 2400 card holders
Realtime System Monitoring
2000 Event History
Realtime Clock
8 Programmable Access Time Zones
24 Programmable Holiday Dates
Supports two 26-Bit Wiegand compatible Readers
Three Modes of Operation
Normal Mode
Bypass Mode
Secure Mode
Electric lock and auxiliary relay Output
Exit button
Door closing magnetic sensor
Forced open and Door Ajar alarm
Two Status / Programming LED on Keypad
Built-in anti-tamper alarm
Operating Voltage: 12V DC
Maximum Input Current: (Not including attached devices) Standby: 65mA, Maximum: 120mA
Battery Charger: 12V DC Lead Acid Battery Up to 7AH recommended
Network Capacity: maximum 8 units in one network RS485 door access control system
Card capacity: 2400 users
Events capacity: 2000 events
Card type: 125KHz EM4100 card
Keypad function: programming and door openning
Outputs
Lock Strike Relay Output: 5A Relay
Lock Strike Power Supply: 12V DC constant voltage 1.2 A current limit
Auxiliary Relay Output: 1A Relay Closed to Ground
Reader Power Supply: Voltage: 12V DC / Max Current: 300mA
Inputs
Release to Exit (REX): N.O. Dry Contact
Door Monitor: N.C. Dry Contact
Reader Input: 26-Bit Wiegand Compatible
Operating Temperature: -25℉to 145℉(-31℃to 63 ℃)
Operating Humidity: 0 to 95% (Non-Condensing)
Mechanical Characteristics
Dimensions: 5.3” (134mm) L x 3.4” (85mm) W x 1.2” (30mm) D
Weight: 3 lbs (1500g).
